Installation method and precautions of through hole slip ring

Author:coco|Source:偲诺电子(CENO) | Release time:2019-05-20

1.Installation method
1.1. Move the inner hole of the slip-ring toward to the installation shaft, and push it with certain force to axial predetermined position .
1.2. Tighten the four screws on slip ring spindle , to fix rotor of slip ring on the mounting shaft.
1.3. Connect conduct wire to corresponding circuit according the wire remark number. If necessary, these connection can be properly secured and fixed, to avoid  insulation layer or affect slip ring rotation when the  wire is contacted with rotating shaft.
1.4 Fix the anti-rotating tab  on slip ring stator for stop rotating, with suggestion do not fix tightly.
Installation method and precautions of through hole slip ring

2.Attention Item
2.1.Slip ring could not bear load and wire shall not bear the external tension.
2.2.Protect  the wire well during mounting the slip ring, for  avoid insulation damaging to affect slip ring quality.
2.3.Keep slip ring working in a dry and dust-free environment, as it is a precious electrical component. If the environment condition are harsh, slip ring should be required do protection measures.
Close