The Ethernet slip ring is designed for LAN communication and is used for the cable slip ring of 250MHz frequency signal design. There is no essential difference between a 100 Mbps Ethernet slip ring and a Gigabit Ethernet slip ring, except that the supported Ethernet transmission rate is different. They can be combined with other signals or servo signal to form a strong or weak electrical slip ring.
ECN000-04P2-13S-01EG | Specification |
| Current | 4*10A,13*2A(signal),1group 1000M Ethernet |
| Voltage | 0~50VDC |
| Electrical noise | ≤30mΩ(50rpm) |
| Dielectric strength | ≥300V@50Hz(power) ≥100V@50Hz(signal) |
| Insulation resistance | 300MΩ@300VDC(power) 300MΩ@100VDC(signal) |
| Operating speed | 0-100 rpm |
| Contact material | precious metals |
| Operating temperature | -40~+65℃ |
| IP protection grade | IP54 |
Outline drawing
Email:sales@ceno360.com
Tel: +86(755) 2342 0945
Fax: +86(755) 2342 0749
Web: http://www.ceno360.com
Address:BuildingB, Xinjianxing Technology Industrial Park, Fengxin Road, Guangming New District, Shenzhen,China.
Product
Application
News
About Us
+86(755) 2342 0945
Email：Email：sales@ceno360.com
CN
skype
phone
message
