QCN0102-03P1-05S is a pneumatic slip ring integrated power and signal from CENO electronic. There are 3circuits for 5A and 5 circuits for signal and 1 channel for pneumatic. Pneumatic or hydraulic rotary unions combined slip ring is designed for some special application that require both electric ring and Pneumatic / hydraulic rotary unions. CENO takes our own technical advantages to developed this kinds of slip ring, which is more convenient for users in installation and operation. Now it has been more and more wildly used in various industries.
Specification
QCN0102-03P1-05S | Specification |
Current & Circuits | 3 circuits * 5A; 5 circuits * signal |
Rating Voltage | 0~380VAC |
Dielectric strength | ≥1000VAC@50Hz |
Isolation resistance | ≥500MΩ@500VDC |
Electrical noise | ≤30mΩ (50rpm) |
Operating speed | 0~300rpm |
Contact material | Precious metals |
Housing material | Aluminum alloy |
Working temperature | -20°C~+60°C |
Working humidity | Max60% |
IP protection grade | IP51 |
Lead wire size | AWG22# Tin coated Teflon® UL |
Lead wire length | Rotor : 300mm Stator : 300mm |
Installation | Rotor side fixed on the guest shaft with screws |
Channel | 1 channel * gas |
Interface way | Straight-through type |
Pipe size | Ø10mm |
Pressure | ≤1.0MPa |
Outline drawing